443·386·4445

Objective:

Nuvico EasyNetHD2 setup and use guide on your phone or tablet.  This should help you add DVRs, watch live content, and navigate through recorded footage.  When you finish this, you should be able to view your cameras remotely and navigate your DVR / NVR.

Questions Answered:

Do you have a Nuvico DVR?
Do you want to add this to your phone or tablet and access the cameras from anywhere?
Have you downloaded Nuvico EasyNetHD2?

Steps:

Nuvico EasyNetHD2 Setup – Add Recorders:

  1. Obtain credentials for remote access to system
    1. Address (IP Address or Hostname)
    2. Port (the port used by the recorder)
    3. User (Case Sensitive – your username granting access to system)
    4. Password
  2. Install the App or Play store for EasyNetHD2 by Nuvico


    Nuvico EasyNetHD2 icon

  3. Launch App
  4. “LIVE”
  5. “+”
  6. “Manual Adding”
  7. Enter Variables
    1. Name: This is a friendly name for you to use so you can remember which recorder this is. I recommend using something referencing the location or cameras on the recorder.
    2. Magic IP – don’t use unless instructed to do so (I don’t typically enable)
    3. Address: IP or Hostname of Recorder
    4. Port: As specified by your installer
    5. Only Event Record Data Playback: Enable
    6. Search Speed Improvement: Enable
    7. 1-Division High Quality: Enable
    8. Auto Login: Enable
    9. User: your username and it is case sensitive
    10. Password: Enter this so you can autologin and not enter your credentials every time you want to look at cameras.
  8. Save

Nuvico EasyNetHD2 Setup – Watch Live

  1. From Main Menu > LIVE
  2. Select desired recorder
  3. Rotate screen to change from portrait to landscape modes
  4. Double tap any camera to expand
  5. Double tap again to minimize
  6. Change the number of cameras at bottom by pressing on different grids
  7. PTZ if you have cameras you can control
  8. Capture will capture an image and save it to your device
  9. Spreading or closing fingers will zoom through image (not done through camera so resolution may be poor)

Nuvico EasyNetHD2 Setup – Watch Recorded Footage

  1. From Main Menu > SEARCH
  2. Select desired recorder
  3. Calendar > Select Date
  4. Below Calendar > Select Hour and Minute
  5. Top Right > DONE
  6. Give it a moment to cache videos
  7. Rotate to landscape mode
  8. Double tap any camera
  9. Tapping screen will bring up the menu
  10. Click Play on Bottom left menu bar to enable the player navigation.
  11. Capture will save image to device
  12. Calendar will let you change the date/time
  13. Spreading or closing fingers will zoom through image (not done through camera so resolution may be poor)
Share This